The UK's No.1 Fire Alarm Distributor
Categories
All Products
Optical smoke detector for Wireless systems
Replacement Manual Call Point for Wireless System (without wireless interface)
SenTRI 4" trim ring (pack of 1)
SenTRI Base Label Plate (pack of 10)
SenTRI Sensor Dust Cover (pack of 50)
Detector Base With Diode
Wireless Detector Base
Wireless Detector Base
Wireless Transceiver Interface for communicating with Wireless devices
Wireless Transceiver Interface for communicating with Wireless devices
Replacement Battery Pack for 805593 & 805601
Replacement Wireless Interface for MCP (red)
Replacement Wireless Interface for MCP (red)
Banshee Excel BS - Base sounder, White
Banshee Excel BS - Base sounder, Ivory
FlashDome - LED Beacon, Red
FlashDome - LED Beacon, Red, Deep Base IP66
FlashDome - FlashDome - Intrinsically Safe Red Beacon, 24Vdc
9-10914 Discrete Sampling Plug - White The 9-10914 is a discrete sampling plug in w
Multipoint Deep Back Box Deep Detector
Banshee Excel CH - Red
Banshee Excel CH - Red, Deep Base IP66
Mounting bases for Sita Multipoint ASD detector
Banshee Excel Lite CHL - Red with Red Beacon
Banshee Excel Lite CHL - Red with Red Beacon, Deep Base to IP66
Banshee Excel Lite CHX - Red with Red Beacon, Deep Base IP66
Ziton A45E-2: The A45E-2 addressable interface is designed for installation within the enclosures of equipment associated with fire detection ... more info
Ziton A50E-2: The A50E-2 is an addressable relay providing single pole, volt free, change over contacts. The unit is intended for installation within ... more info
Ziton A51E-1: The A51E is an addressable relay providing double pole, volt free, change over contacts, rated to switch local mains supplies. The unit ... more info
Please be aware this item is no longer available. Please contact us to discuss alternatives. Ziton A60E-2: The A60E-2 line isolator provides ... more info
Kentec A65116203: Syncro XT Analogue Addressable Extinguishant Control Panel: Surface.
The A70E-2 in a single zone interface is fully loop powered and enables existing or new conventional zones to be interfaced to an analogue system, ... more info
Battery back-up kit for mains powered transmitters (includes 0.8Ah battery)
Battery backup kit for mains powered PageTek or RX10 (inc. 0.8Ah batt)
Kentec A90001M10: Syncro Si Extinguishant hold off switch unit: 97 x 97 x 45
Kentec A91000F8: Syncro Si Addressable Extinguishant Status Unit: Flush: 186 x 132 x 55
Kentec A91000M8: Syncro Si Addressable Extinguishant Status Unit: Surface 186 x 132 x 50 Please n
Kentec A91100F8: Syncro Si Addressable Extinguishant Status Unit: c/w Manual Release, Flush: 186 x 132 x 55
Kentec A91100M8: Syncro Si Addressable Extinguishant Status Unit: c/w Manual Release, Surface: 186 x 132 x 50
Kentec A91110F8: Syncro Si Addressable Extinguishant Status Unit: c/w Mode Select & Manual Release, Flush: 186 x 132 x 55
Kentec A91110M8: Syncro Si Addressable Extinguishant Status Unit: c/w Mode Select & Manual Release, Surface: 186 x 132 x 50
AB360: Fire Alarm Bell 6". Indoor.
AB360E: Fire Alarm Bell 8", Outdoor
2.3Ah backup battery, for use with NC925B1 12V PSU
Model ACB-EW is a Waterproof Multi-Heat Sensor, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol. The ACB-EW inc
The ACC-EN has 3 modes, which are controlled from the Control Panel, allowing either the optical element or thermal element or both elements to be ... more info
The ACC-EN has 3 modes, which are controlled from the Control Panel, allowing either the optical element or thermal element or both elements to be ... more info
Introducing Hochiki’s brand new addressable loop-powered multi-sensor, with smoke, heat and CO sensing elements.
KT-HS-2 Extension kit for
KT-HS-3 Extension kit against
DIAG 3/a Diagnostic Tool
CT-1 Smoke pen
SP-CT-1 Replacement Smoke sticks for smoke pen (3 pack)
SuperSens Very High Sensitivity + 3 Alarm Levels + Bar Graph Applications The highly sensitive TITANUS SUPER&
DJ-TM Addressable Optical Alarm Indicator for MicroSENS room ident
TR1-50 TITANUS RACK
TR1-10 TITANUS RACK
TR2-50-NO TITANUS RACK
TR2-10-NO TITANUS RACK
TR-PS-1 Mains supply TITANUS RACK SENS
TR-TU Temperature-module TITANUS RACK
TR-B Bargraph TITANUS RACK
ESU-1 Extinguishing / shut-down module
DS-TR Door contact TITANUS RACK
TS-1 Temperature Sensor TITANUS RACK
SD-1/a Sound Absorber/Muffler Unit
LF-AD-E Filter element f. LF-AD (/a) 15
SF-650-E Filter element for Special fine Filter SF-650 1
SF-400-E Filter element for Special fine Filter SF-400 1
LF-AD Air Filter Assy c/w Filter Elements
SF-650 Special fine Filter - 1
SF-400 Special fine Filter - 1
DM-TP-10-L Detector Module f. ProSENS & SILENT (Normal Sensitivity 0.10% Detector)
DM-TP-01-L Detector Module f. ProSENS & SILENT (High Sensitivity 0.015% Detector)
DM-TP-50-L Detector Module f. ProSENS & SILENT (Low Sensitivity 0.5% Detector)
DM-TP-10-L-F Detector Module f. ProSENS FREEZE (Normal Sensitivity 0.10% Detector)
DM-TP-01-L-F Detector Module f. ProSENS FREEZE (High Sensitivity 0.015% Detector)
DM-TP-50-L-F Detector Module f. ProSENS FREEZE (Low Sensitivity 0.5% Detector)
DM-TT-10-L Detector Module f. TopSENS & SILENT (Normal Sensitivity 0.10% Detector)
DM-TT-01-L Detector Module f. TopSENS & SILENT (High Sensitivity 0.015% Detector)
DM-TT-05-L Detector Module f. TopSENS & SILENT (Low Sensitivity 0.5% Detector)
DM-TT-10-L-F Detector Module f. TopSENS FREEZE (Normal Sensitivity 0.10% Detector)
DM-TT-01-L-F Detector Module f. TopSENS FREEZE (High Sensitivity 0.015% Detector)
DM-TT-05-L-F Detector Module f. TopSENS FREEZE (Low Sensitivity 0.5% Detector)
DM-TM-50 MicroSens Basic Unit Applications The compact TITANUS MICRO·SENS® is ideal for
DM-TM-R-50 MicroSens with room ident up to 5 points- inc relay box Applications
DM-TM-B-50 MicroSens with bar graph Applications
DM-TM-RB-50 MicroSens with room ident Applications
DM-TM-R-50-S1 MicroSens with room ident up to 5 points- inc relay box (S1 Version for NOMS) Applications
TP-10L ProSens 1 (Normal Sensitivity c/w 0.10% Detector) Applications The
Copyright © 2024 The Fire Alarm Store. Powered by Zen Cart